TALON Oil Filter Tool (Up to 1500 in lbs)
THE ULTIMATE IN OIL FILTER REMOVAL!
GOT A STUCK OIL FILTER?
WATCH THE VIDEO BELOW!
The TALON OIL FILTER TOOL has been reinvented and improved!! The 10M-TALON oil filter tool has undergone some changes through the years, improving as the demands of our customers became greater. The new TALON is our strongest and most compact yet. Just pop the NEW TALON on a 3/8 drive extension and ratchet and it gets the job done.
The TALON Oil Filter Tool was created to remove stubbornly stuck oil filters. Bogert Aviation wanted the tool to be safe in tight quarters and unable to slip, attempting to minimize damage to nearby components. This is still a messy process but this tool is your best chance of removing stuck filters without damaging anything else. Don't cuss -- call us!!!
Comes with #10(0.194) and 6MM(0.236) screws.
Features
- Three pin (TALON) engagement in oil filter plate for stability and strength
- Good for up to 1500 in. lbs. of torque
- Works in tight spaces!
- Works on Aircraft, Automotive, Marine and Recreational Vehicle applications
- Made in the USA.
Benefits
- This is a lot less frustrating than trying to remove a stuck filter by any other method
- Saves time so you can do other things
- Saves money
Instructions
- Open the filter can and remove the filter element. If necessary, cut or tear open the filter can where ever it is accessible, gaining access to the filter element.
- Use the new filter as a guide. Set the pin positions on the 10M-TALON Oil Filter Tool to fit into the oil holes in the oil filter plate.
- Insert the Oil Filter Tool into the stuck filter can using a 3/8" ratchet extension and ratchet wrench. Engage the oil holes in the filter plate with the pins of the oil filter tool.
- Turn counter clockwise to loosen the filter.
Size
- Adjustable down to 1.10" in three prong mode for smaller oil filters
- Adjustable down to .95" in two prong mode for smaller oil filters
- Adjustable up to 3.14" for larger oil filters
Videos
Customer Reviews
I loved it but for $50 Its way over priced.
The Talon was just what I needed for the oil filter removal. Tool is awesone.
I had a welded on oil filter that I couldn’t get off I tried all that I could. I went on YouTube to see if there was any ideas. A video came up with a gentleman praising this product called the talon so I watched it and I said maybe what do I have to lose but before I ordered it I emailed them and within a day Bogert reached out to me and I sent them a picture oh and by the way my filter didn’t have the normal holes inside to grab into mine had square slots. bogerts engineers looked at it and said this tool will work all I had to do was drill three hole and it would come off and it did but with only two hole. Thank you Bogert for inventing this tool🙏🏽🙏🏽🙏🏽
Best tool. I recommend anyone to invest in such a great tool. This tool will save you time and frustration by getting the job done in a very short time. Better believe.
It's a shame it didn't work in my case . I had to resort to cutting it off , on my V8 Trike .
We Also Recommend
